Robustel EG5100 Industrial Edge Computing Gateway
Robustel EG5100 Industrial Edge Computing Gateway is backordered and will ship as soon as it is back in stock.
Robustel Cloud Manager Service — zero-touch provisioning, fleet monitoring, over-the-air updates and secure remote access, at no cost for the first 12 months. Note that RCMS can increase data usage, which is worth checking against your plan on metered SIMs. What RCMS does →
Tick this and we’ll contact you after you order to recommend a data plan and SIM for your site. No obligation, and it doesn’t change your order.
Australian compliance
Australian compliance
Certifications are listed only where the manufacturer states them against this order code. RCM is never assumed. If an approval matters for your project, ask us and we will confirm it in writing with the factory before you specify it.
Ordering and freight
Ordering and freight
Prices are ex-GST. GST and freight are calculated at checkout. If your organisation raises purchase orders, add the PO number to the cart note and it will come through with the order.
Robustel EG5100 Industrial Edge Computing Gateway is backordered and will ship as soon as it is back in stock.
Manufacturer-published specifications
Every value below is traceable to the manufacturer's own published material for this order code. Where a figure is not published, the row is left out rather than estimated or borrowed from a similar model.
The EG5100 combines cellular WAN connectivity with local data processing on an ARM Cortex-A7 platform running RobustOS Pro, a Debian-based Linux OS. It supports Docker containers and a Linux SDK, so customer applications can run on the device for protocol conversion, data logging and edge pre-processing before backhaul. Field devices connect over two software-configurable RS-232/RS-485 serial ports, two digital inputs and two digital outputs.
Key features
- Dual-SIM 4G/LTE with 3G/2G fallback and Ethernet WAN failover
- RobustOS Pro with Docker container and SDK support
- ARM Cortex-A7 792 MHz, 1 GB DDR3, 8 GB eMMC
- 2 x RS-232/RS-485 software-configurable serial ports
- 2 x digital input and 2 x digital output (wet contact), 8-pin terminal block
- 2 x RJ45 10/100 Mbps Ethernet, configurable as 1 WAN + 1 LAN or 2 LAN
- Wi-Fi 802.11a/b/g/n/ac 2x2 MIMO and GNSS available on selected variants
Regional and carrier-specific variants differ in cellular bands, certifications and fitted options. Contact us to confirm the correct order code for your deployment.
-
Part number
-
Ingress protection
-
Min operating temp (°C)
-
Max operating temp (°C)
-
Power input
-
Radio bands and standardsLTE FDD B1/2/3/4/5/7/8/12/13/18/19/20/25/26/28, LTE TDD B38/39/40/41, 3G, 2G
-
Connectivity4G/LTE, 3G, 2G
-
Network and serial interfaces2 x RJ45 10/100 Ethernet (WAN/LAN configurable, 1.5 kV isolated), 2 x RS-232/RS-485 (or 1 x serial + 1 x CAN), 2 x DI, 2 x DO, 1 x USB 2.0 host, SIM slot x2 (Mini SIM 2FF), 2 x cellular antenna SMA-K
-
Ports and connectorsFast Ethernet, RS-232, RS-485, CAN bus, Digital I/O, USB, Dual SIM, SMA
-
MountingDIN rail, Wall
-
Dimensions (mm)
-
Weight (g)
-
CertificationsCE, UKCA, CB, RCM, FCC, IC
-
Datasheet
-
Firmware portal
Prices are ex-GST. GST and freight are calculated at checkout.
Blank fields are deliberate. We publish the manufacturer's own figures and leave the rest out. If you need a value that isn't here, ask and we will get it from the factory rather than guess it.
Some lines are enquiry-only. Where an order code or an approval needs confirming before we sell it into Australia, the page carries a request-a-quote path instead of an add-to-cart button.
Purchase orders are welcome. Add your PO number to the cart note and it travels with the order.
Payment and purchasing
Payment methods
All prices are ex-GST. Add a purchase order number to the cart note if your organisation needs one on the invoice.






