Reach Further
Combine with either A8-Ein (ac) or A3-Ei for WiFi coverage up to 3 km
Speed and Range
2.4 and 5 GHz dual-band dual concurrent access
Easy Installation
Even non-technical team members can simply plug-and-play
Weatherproof
Durable IP55 casing with built-in lightning protection
Recommended IoT Verticals for the
Altai C2s Dual-Band 2×2 AC Super WiFi AP/Bridge
Agriculture
Warehousing & Logistics
Healthcare
Public Transport
Enterprise IT
Oil, Gas & Mining
Security
Retail & Payments
Smart Cities
Environmental IoT
Industrial IoT
Energy & Utilities
The Altai C2s dual-band 2×2 802.11ac access point is specially designed for service providers that need carrier grade performance – such as outstanding coverage and high capacity – while remaining a highly economical solution.
Key Features:
- 2.4 and 5 GHz dual-band dual concurrent access
- 2×2 MIMO for both 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac) radios
- Up to 50% larger coverage minimises the number of APs required for any WiFi network
- Combined with either A8-Ein (ac) or A3-Ei, the solution delivers WiFi coverage up to 3 km
- Standalone, controller-based, or cloud-based management with AltaiCare
- IP-55 rated carrier grade 802.11a/b/g/n/ac AP for different applications
- Light weight with built-in lightning protection
- Easy installation & web-based or cloud-based management
- Multi-operating modes allowed: AP, bridge mode or CPE
- 802.3at compliant PoE
Wireless Interface |
|
802.11b/g/n (2×2:2) Radio | |
Operating Mode | AP/CPE/Repeater |
Standard | IEEE 802.11b/g/n |
Operating Frequency | 2.400 – 2.484 GHz (Ch 1-13) |
Transmit Power | 27 dBm (Max.) 27 dBm (HT20/40 @ MCS0) 22 dBm (HT20/40 @ MCS7) |
Receiver Sensitivity (Typical) | – 802.11b 11 Mbps -89dBm 1 Mbps -92 dBm – 802.11g 54 Mbps -78 dBm 6 Mbps -92 dBm – 802.11n HT20 -91 dBm HT40 -88 dBm |
802.11a/n/ac (2×2:2) Radio | |
Operating Mode | Access Point/CPE/Bridge/Repeater |
Standard | IEEE 802.11a/n/ac |
Operating Frequency | 5.150 – 5.350 GHz 5.470 – 5.725 GHz 5.725 – 5.850 GHz |
Transmit Power | 27 dBm (Max.) 27 dBm (VHT40/80 @ MCS0) 20 dBm (VHT40/80 @ MCS9) |
Receiver Sensitivity (Typical) | 802.11a 54 Mbps -79 dBm; 6 Mbps -93 dBm 802.11n HT20 -93 dBm; HT40 -90 dBm 802.11ac VHT20 -93 dBm; VHT40 -90 dBm; VHT80 -87 dBm |
For both 2.4 and 5 GHz |
32 SSID (16 SSID per Radio) |
WMM, 802.11h, 802.11k, 802.11r, 802.11v, 802.11w |
Passpoint (Release 2) |
Fast Roaming |
Band Steering |
Multi-AP Steering** |
Smart Load Balancing |
Dual-Radio Redundancy |
1+ N Redundancy |
Smart Mesh Networking** |
Auto Channel Selection and TX Power Control |
Bandwidth Control Per SSID/Client |
Altai AirFi™ Throughput Optimisation |
Antennas |
|
2.4 GHz Antenna | |
Built-in Antenna | 6 dBi Patch |
Frequency | 2.4 – 2.5 GHz |
Polarization | 2×2 MIMO Diversity Polarized |
Horizontal Beamwidth | 65° (-3 dB) |
Vertical Beamwidth | 60° (-3 dB) |
VSWR | 2 (Max.) |
Impedance | 50 Ω |
Front-to-back Ratio | -15 dB (Max.) |
Isolation Between Ports | 15 dB (Min.) |
5 GHz Antenna | |
Built-in Antenna | 9 dBi Patch |
Frequency | 5.150 – 5.875 GHz |
Polarization | 2×2 MIMO Diversity Polarized |
Horizontal Beamwidth | 70° (-3 dB) |
Vertical Beamwidth | 30° (-3 dB) |
VSWR | 2 (Max.) |
Impedance | 50 Ω |
Front-to-back Ratio | -15 dB (Max.) |
Isolation Between Ports | 15 dB (Min.) |
Networking |
Switch (Bridge) and Gateway Mode IPv4/IPv6 Dual-Stack NAT DHCP Client/Server PPPoE Client Soft-GRE VLAN Multicast Rate Filter/IGMP Snooping |
Security |
Authentication – Open, Shared key, WPA/WPA-PSK, WPA2/WPA2PSK, WPA3*, 802.1x (EAP-PEAP/TLS/TTLS/SIM/AKA) Encryption – WEP, TKIP, AES Inter/Intra-SSID Client Isolation MAC-based Access Control (White/Black List) RADIUS/Active directory Dynamic VLAN Assignment Firewall WIDS/WIPS Broadcast/Multicast/Unicast Flooding Control |
Management |
|
Management Platforms: AltaiGate, AltaiCare, AltaiCare Appliance Web User Interface Command Line Interface (SSH) Remote Factory Reset Trusted Management IP List SNMP v1/v2c/v3 MIB2/IF-MIB/Altai Enterprise MIB Syslog Spectral Analysis** KPI Monitoring** Client OS and Hostname Detection |
Physical Specifications |
|
Dimension | 280 x 80 x 27 mm |
Weight | 0.4 kg |
Mounting | Pole, Wall or Window-Mounted |
Network Interface | 2 x 10/100/1000 Mbps Ethernet Ports |
Power |
|
Power Supply | 24V Passive PoE PD or 802.3at PoE PD via Adapter |
Power Consumption | 6 W (Typical)/12 W (Max.) |
Environmental Specs |
|
Operating Temperature | -20 °C to +55 °C |
Storage Temperature | -40 °C to +80 °C |
Humidity | Up to 95% (Non-Condensing) |
Wind Loading | Up to 200 km/h (124 mph) |
Weatherproof | Outdoor UV Stabilised Plastic IP55 Compliant |
Certifications |
FCC/CE/Others* RoHS Compliance RCM |
* For more information about frequency bands in different countries, please contact idatanet directly.
**Will be available in the future. The coverage range will vary depending on NLOS and interference conditions The transmit power may vary according to country regulation