Altai C1xan Super WiFi CPE/AP

$172.00

Complementing Altai’s super WiFi base station coverage solution are the C1xn+/C1xan high-performance CPEs, which employ a patented smart-signal processing algorithm and an antenna designed to increase WiFi signal strength (transmission and reception) as well as the client’s throughput.
It can also operate as a standalone access point to provide line-of-sight coverage of up to 250m.

SKU: AT-SD.C1-XAN00-01 Categories: , ,

Out of stock

Cross-Band Coverage

The C1xn+ operates in the 2.4Ghz band. The C1xan operates in
the 5Ghz band

Added AP

Can also operate as a standalone access point to provide line-of-sight coverage of up to 250m

Total Control

Per-end-user remote web-based management and client association status

Outdoor Use

Weatherproof case (IP55 compliant) for enabling out-of-the-box outdoor installation

Recommended IoT Verticals for the

Altai C1xan Super WiFi CPE/AP

IoT Solutions for Agriculture

Agriculture

Smart solutions for Logistics

Warehousing & Logistics

Healthcare and Medical IoT Solutions

Healthcare

Internet connectivity for public transport networks

Public Transport

IoT Solutions for Enterprise

Enterprise IT

Smart solutions for Mining

Oil, Gas & Mining

IoT Security solutions

Security

IoT Solutions for POS systems and retail environments

Retail & Payments

IoT for Smart Cities

Smart Cities

Solutions for environmental monitoring

Environmental IoT

Industrial IoT solutions

Industrial IoT

IoT Solutions for Energy

Energy & Utilities

The Altai C1xn+ / C1xan WiFi CPE/AP is designed as an essential component in the Altai Super WiFi system to extend outdoor Wi-Fi coverage into indoor areas for broadband connectivity in 5GHz band or use as an AP for pico coverage.

Key Features:

  • Patented signal processing for improved radio performance in LOS and NLOS conditions
  • Supports multiple isolated end-users through per client/VAP bandwidth control
  • Per-end-user remote web-based management and client association status
  • Optional high-performance external omni or sector antennas – optimising performance when operating in conjunction with Altai A8n series antennas
  • Operates both as a CPE and as a small WiFi access point for local coverage; it is also perfect for use as low cost point-to-point bridge
  • Integrated 8-level LED alignment mechanism for fast, simple and best performing installation
  • Weatherproof case (IP55 compliant) for enabling out-of-the-box outdoor installation
  • The C1xn+ operates in the 2.4GHz band while the C1xan operates in the 5GHz band

Wireless Interface

802.11b/g/n (2×2) Radio
Operating Mode AP/ CPE/Bridge/Repeater
Standard IEEE 802.11b/g/n
Operating Frequency 2.400 – 2.484 GHz (Ch 1-13)
Transmit Power 29 dBm (Max.)
26 dBm (Per Chain)
Receiver Sensitivity (Typical)

– 802.11b
11 Mbps  -91 dBm
1 Mbps -96 dBm

– 802.11g
54 Mbps -81 dBm
6 Mbps -95 dBm

– 802.11n
HT20 -95 dBm
HT40 -92 dBm

16SSID (Max)
802.11h, 802.11k, 802.11r, 802.11v, 802.11w
Passpoint (Release 2)
Fast Roaming
Altai AirFi™ Throughput Optimization
WMM (802.11e)
1+ N Redundancy
Multi-AP Steering**

 

Antennas

External Antenna 15 dBi 120º (-6 dB) Sector 10 dBi Omni 5 dBi Omni
Antenna Connector 2 x RP-SMA Female

 

Networking

Switch (Bridge) and Gateway Mode

IPv4/ IPv6 Dual-stack

NAT

DHCP Client/ Server

PPPoE Client

Soft-GRE

VLAN

Bandwidth Control Per VAP/ Client

Multicast Rate Filter/IGMP Snooping

 

Security

Authentication – Open, Shared key, WPA/ WPA-PSK, WPA2/ WPA2-PSK, , WPA3**, 802.1x (EAP-PEAP/ TLS/ TTLS/ SIM/ AKA)

Encryption – WEP, TKIP, AES

Inter/ Intra-client Isolation

MAC-based Access Control (White/ Black List)

RADIUS

Active directory

Firewall

WIDS /WIPS

Rogue AP Detection*

 

Management

Management Platforms: Standalone, AltaiGate, AltaiCare

Web User Interface

Command Line Interface (SSH)

SNMP v1/ v2c / v3

MIB2/ IF-MIB/ Altai Enterprise MIB

Syslog

Remote Factory Reset

Auto Channel Selection and TX Power Control

Spectral Analysis**

KPI Monitoring**

Client OS Detection

 

Physical Specifications

Dimension 240.5 x 80 x 27 mm (Excluding Mounting)
Weight 240g
Mounting Desktop, Pole, Wall or Window-Mounted
Network Interface 10/100 Mbps Ethernet Port
LED Display Main Power Status, Ethernet Status, 8-Level Signal Strength
(User Configurable)

 

Power

Power Supply 18V Passive PoE PD or 802.3af PoE PD via Adapter
Power Consumption 6 W (Typical)/8 W (Max.)

 

Environmental Specs

Operating Temperature -20 °C to +55 °C
Storage Temperature -40 °C to +80 °C
Humidity Up to 95% (Non-Condensing)
Wind Loading Up to 200 km/h (124 mph)
Weatherproof Outdoor UV Stabilized Plastic IP55 Compliant

 

Certifications

FCC/CE/Others*

RoHS Compliance

Wi-Fi Alliance Certified*

RCM

* For more information about frequency bands in different countries, please contact idatanet directly.

**Will be available in the future. The coverage range will vary depending on NLOS and interference conditions. The transmit power may vary according to country regulation