Altai C1n Super WiFi CPE/AP
The C1n high-performance Customer Premises Equipment complements Altai’s super WiFi base station coverage solution.
A smart-signal processing algorithm increases WiFi signal strength (transmission and reception) and it can also operate as a standalone access point.
Cross-Band Coverage
The C1n operates in the
2.4GHz band
Added AP
Can also be used as a
standalone Wi-Fi access point
for smaller networks
Total Control
Per-end-user remote web-based management and client
association status
Outdoor Use
Weatherproof case (IP55 compliant) for enabling out-of-the-box
outdoor installation
Recommended IoT Verticals for the
Altai C1n Super WiFi CPE/AP
Agriculture
Warehousing & Logistics
Healthcare
Public Transport
Enterprise IT
Oil, Gas & Mining
Security
Retail & Payments
Smart Cities
Environmental IoT
Industrial IoT
Energy & Utilities
The Altai C1n WiFi CPE/AP is designed as a component in the Altai Super Wi-Fi system to extend outdoor Wi-Fi coverage into indoor areas for broadband connectivity or use as an AP for pico coverage.
Key Features:
- Patented signal processing for improved radio performance in LOS and NLOS conditions
- Supports multiple isolated end-users through per client/VAP bandwidth control
- Per-end-user remote web-based management and client association status
- High-performance antennas with ±45°cross-polarised patch antennas – optimising performance when operating in conjunction with Altai A8n series antennas
- Operates both as a CPE and as a small Wi-Fi access point for local coverage
- Integrated 8-level LED alignment mechanism for fast, simple and best performing installation
- Weatherproof case (IP55 compliant) for enabling out-of-the-box outdoor installation
- The C1n operates in the 2.4Ghz band while the C1an operates in the 5Ghz band Wi-Fi channel
Wireless Interface |
|
| 802.11b/g/n (2×2) Radio | |
| Operating Mode | AP/ CPE/Repeater |
| Standard | IEEE 802.11b/g/n |
| Operating Frequency | 2.400 – 2.485 GHz (Ch 1-13) |
| Transmit Power | 29 dBm (Max.) 26 dBm (Per Chain) |
| Receiver Sensitivity (Typical) |
– 802.11b – 802.11g – 802.11n |
| 16SSID | |
| WMM, 802.11h, 802.11k, 802.11r, 802.11v, 802.11w | |
| Passpoint (Release 2) | |
| Fast Roaming | |
| Auto Channel Selection and TX Power Control | |
| Bandwidth Control Per SSID/Client | |
| Altai AirFi™ Throughput Optimization | |
| 1+ N Redundancy | |
| Multi-AP Steering** | |
Antennas |
|
| Built-in 2.4 GHz Antenna | 10 dBi Dual Slant ±45° Sector |
| Horizontal Beamwidth | 70° (-3 dB) |
| Vertical Beamwidth | 30° (-3 dB) |
| Front-to-back Ratio | -20 dB (Max.) |
Networking |
|
Switch (Bridge) and Gateway Mode IPv4/IPv6 Dual-Stack NAT DHCP Client/Server PPPoE Client Soft-GRE VLAN Multicast Rate Filter/IGMP Snooping |
Security |
|
Authentication – Open, Shared key, WPA/WPA-PSK, WPA2/ WPA2-PSK, WPA3*, 802.1x (EAP-PEAP/TLS/TTLS/SIM/AKA) Encryption – WEP, TKIP, AES Inter/Intra-SSID Client Isolation MAC-based Access Control (White/Black List) RADIUS/Active directory Dynamic VLAN Assignment Firewall WIDS/WIPS Broadcast/Multicast/Unicast Flooding Control |
Management |
|
|
Management Platforms: AltaiGate, AltaiCare, AtlaiCare Appliance Web User Interface Command Line Interface (SSH) Remote Factory Reset Trusted Management IP List SNMP v1/v2c/v3 MIB2/IF-MIB/Altai Enterprise MIB Syslog Spectral Analysis** KPI Monitoring** Client OS and Hostname Detection |
Physical Specifications |
|
| Dimension | 242 x 80 x 27 mm (Without Mounting Kit) |
| Weight | 0.4 kg |
| Mounting | Desktop, Pole, Wall or Window-Mounted |
| Network Interface | 10/100 Mbps Ethernet Port |
| LED Display | Main Power Status Ethernet Status 8-Level Signal Strength (User Configurable) |
Power |
|
| Power Supply | 18V Passive PoE PD or 802.3af PoE PD via Adapter |
| Power Consumption | 6 W (Typical)/8 W (Max.) |
Environmental Specs |
|
| Operating Temperature | -20 °C to +55 °C |
| Storage Temperature | -40 °C to +80 °C |
| Humidity | Up to 95% (Non-Condensing) |
| Wind Loading | Up to 200 km/h (124 mph) |
| Weatherproof | Outdoor UV Stabilized Plastic IP55 Compliant |
For Antenna Pattern download Data Sheet
Certifications |
|
FCC/CE/Others* RoHS Compliance RCM |
* For more information about frequency bands in different countries, please contact idatanet directly.
**Will be available in the future. The coverage range will vary depending on NLOS and interference conditions. The transmit power may vary according to country regulation