Altai A3-Ei Dual-Band Access Point
$1,567.00
The Altai A3-Ei 3×3 MIMO 802.11ac WiFi Dual-band Access Point is designed to be used in Altai Super WiFi systems to provide up to 1.75 Gbps high capacity dual-band dual-concurrent coverage at 2.4 and 5 GHz.
In stock
More Flexibility
Multi-operating modes allowed:
AP, bridge, repeater mode or CPE
Speed and Range
Indoor and Outdoor
IP-67 rated carrier grade dual-band AP for both outdoor and indoor applications
Easy Installation
Easy installation and
web-based management
Recommended IoT Verticals for the
Altai A3-Ei Dual-Band Access Point
Agriculture
Warehousing & Logistics
Healthcare
Public Transport
Enterprise IT
Oil, Gas & Mining
Security
Retail & Payments
Smart Cities
Environmental IoT
Industrial IoT
Energy & Utilities
The A3-Ei can be used for wireless broadband access for both the residential users and commercial customers.
It supports concurrent 2.4 GHz and 5 GHz dual-band operations, and is a cost effective and flexible solution which supports long access range with an Altai C1n or C1an CPE for 2.4 GHz and 5 GHz operation respectively.
Key Features:
- High capacity 1.3 Gbps in 5 GHz and 450 Mbps in 2.4 GHz
- Built-in 2.4 and 5 GHz 3×3 MIMO spatial polarized antennas
- 3×3 MIMO in 3 streams for both 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac) radios
- IP-67 rated carrier grade 802.11a/b/g/n/ac AP for outdoor applications
- Fill-in coverage area in challenging RF environment
- AltaiCare cloud-based zero configuration and secured AP management
- Multi-operating modes allowed: AP, bridge, repeater mode or CPE
- 802.3at and 802.2af compliant PoE
Wireless Interface |
|
| 802.11b/g/n (8×8:2) Radio | |
| Operating Mode | Access Point |
| Standard | IEEE 802.11b/g/n |
| Operating Frequency | 2.400 – 2.484 GHz (Ch 1-13) |
| Transmit Power | 27 dBm (Max.); 5 – 24 dBm (Per Chain) in 1 dB step |
| Receiver Sensitivity (Typical) | – 802.11b 11 Mbps -90 dBm; 1 Mbps -95 dBm
– 802.11g 54 Mbps -80 dBm; 6 Mbps -93 dBm – 802.11n HT20 -94 dBm; HT40 -89 dBm |
| Connect up to 8 Antennas | |
| Interference Mitigation | |
| 802.11a/n/ac (2×2:2) Radio | |
| Operating Mode | AP/Bridge/Repeater |
| Standard | IEEE 802.11a/n/ac |
| Operating Frequency | 5.150 – 5.350 GHz
5.470 – 5.725 GHz 5.725 – 5.850 GHz |
| Transmit Power | 29 dBm (Max.)
26 dBm (Per Chain) |
| Receiver Sensitivity (Typical) | 802.11a 54 Mbps -79 dBm; 6 Mbps -92 dBm
802.11n HT20 -92 dBm; HT40 -89 dBm 802.11ac VHT20 -92 dBm; VHT40 -89 dBm VHT80 -87 dBm |
| For both 2.4 and 5 GHz |
| 32 SSID (16 SSID per Radio) |
| WMM, 802.11h, 802.11k, 802.11r, 802.11v, 802.11w |
| Passpoint (Release 2) |
| Fast Roaming |
| Band Steering |
| Dual Radio Redundancy |
| 1+ N Redundancy |
| Auto Channel Selection and TX Power Control |
| Bandwidth Control Per SSID/Client |
| Altai AirFi™ Throughput Optimisation |
Antennas |
|
| 2.4 GHz Antenna | |
| External Antenna | 14 dBi (Max.) Sector |
| Frequency | 2.4 – 2.5 GHz |
| Polarization | Dual Slant ±45° |
| Horizontal Beamwidth | 70° (-3 dB) |
| Vertical Beamwidth | 12° (-3 dB) |
| Antenna Connector | 8 x N-Female |
| 5 GHz Antenna (Optional Accessories) | |
| External Antenna | 20 dBi Panel/9 dBi Omni/ 16 dBi 100º Sector |
| Antenna Connector | 2 x N-Female |
Networking |
| Switch (Bridge) and Gateway Mode
IPv4/IPv6 Dual-Stack NAT DHCP Client/Server PPPoE Client Soft-GRE VLAN Multicast Rate Filter/IGMP Snooping |
Security |
| Authentication – Open, Shared key, WPA/WPA-PSK, WPA2/WPA2PSK, WPA3*, 802.1x (EAP-PEAP/TLS/TTLS/SIM/AKA)
Encryption – WEP, TKIP, AES Inter/Intra-SSID Client Isolation MAC-based Access Control (White/Black List) RADIUS/Active directory Dynamic VLAN Assignment Firewall WIDS/WIPS Broadcast/Multicast/Unicast Flooding Control |
Management |
|
| Management Platforms: AltaiGate, AltaiCare, AtlaiCare Appliance
Web User Interface Command Line Interface (SSH) Remote Factory Reset Trusted Management IP List SNMP v1/v2c/v3 MIB2/IF-MIB/Altai Enterprise MIB Syslog Spectral Analysis* KPI Monitoring* Client OS and Hostname Detection |
Physical Specifications |
|
| Dimension | 360 x 234 x 80 mm (Chassis) |
| Weight | 4 kg (Unit Weight)
6.5 kg (Gross Weight) |
| Mounting | Pole or Wall-mounted |
| Network Interface | 10/100/1000 Mbps Ethernet Port |
Power |
|
| Power Supply | 56V Passive PoE PD |
| Power Consumption | 30 W (Typical)/65 W (Max.) |
Environmental Specs |
|
| Operating Temperature | -40 °C to +60 °C (Ambient) |
| Storage Temperature | -40 °C to +85 °C |
| Humidity | Up to 95% (Non-Condensing) |
| Lightning Protection | EN 61000-4-5 |
| Wind Loading | Up to 216 km/h (134 mph) |
| Weatherproof | IP67 Compliant |
| Model | PN | LTE Category | Frequency Bands* | Country/Region | Certification (*In progress) |
| •FCC/CE/Others* • RoHS Compliance |
* For more information about frequency bands in different countries, please contact idatanet directly.